PEDROLLO VX

VXC-VX-VXC4 – Submersible Pumps

Specifications

VXC 15/45 1.1 kW, 11.5m, 39 m³/h – Impeller: AISI304& Thermal Motor Protection, Floatswitch
VX 75/65 5.5 kW, 24.8m, 90 m³/h
VXC4 55/100 4kW, 12.2m, 132m³/h – Impeller: Cast Iron (Cataphoresis)

Features

Special 3PH Thermal Protector – Activates in Case of Overheating or Abnormal Power Consumption.
Required: DOL Control Panel, Dirty Water Float switch
Sewage, Wastewater, Dirty Water With Suspended Solids, Sludge-Mixed Water, Activated and Putrid Sludge.

Max Immersion Depth: 10m
Fixed installation is available on order

Inquire about this product

PEDROLLO VX Pumps are reliable for handling sewage waste, groundwater, and surface water in domestic, industrial, and civil environments.

Also, best for draining flooded areas, underground parking garages, car washes, and septic tank drainage.

Pedrollo VX Pump Construction

Pump Housing: Cast Iron
Impeller: Stainless steel AISI 304
Motor Sleeve: Stainless steel AISI 304
Shaft: Stainless steel AISI 43

Technical Specifications

Flow Rate: up to 750 l/min (45 m³/h)
Head: Up to 15.5m
Liquid temperature: up to +40° C
Suspended Solid Handling Capacity: – up to Ø 40 mm for VX /35
- up to Ø 50 mm for VX/50
Maximum Operating Depth Below Water Level: Up to 5 m.

Pedrollo VX Pump Features

All pumps are supplied with a 10 m neoprene cable.
Integrated float Switch for low-level Control
Control Box—recommended for single-phase models.
Enclosed induction motor built to provide continuous pumping if the pump remains partially submerged (min 350mm)

OPERATING CONDITIONS

Pumped liquid: Thin, chemically nonaggressive liquids containing suspended particles up to the specified size.
Fluid Temperature: +40°C
Operating Depth: 10m