PEDROLLO D
D – Submersible Pumps for Drainage
Specifications
| Pump Model | Power | Head | Max flow rate |
| Dm 10 | 0.75 Kw | 16m | 18m³/h |
| Dm 30 | 1.1 Kw | 26m | 16.5m³/h |
Features
- Pump Body: Cast Iron with Cataphoresis Treatment
- Impeller: Open Type Techno-polymer
- Motor Casing: AISI304
- Double Mech Seal Separated by an Oil Chamber
- Winding Integrated Thermal Motor Protection
- Max Immersion: 5m
- Particle Passage: 10mm, Suspended
- Liquid: Rainwater, Wastewater & Drainage Water
- External Float Switch
Inquire about this product
Description
PEDROLLO D is a range of submersible drainage pumps with a semi-open impeller design for draining clear or slightly dirty water in homes and public places. It could be used in basements, garage flood handling, swimming pools, and tank drainage. These pumps do well in automated fixed installations.
Pump Construction
- Pump Housing: Cast Iron
- Motor Casing: Stainless steel AISI 304
- Impellers: Noryl Plastic
- Shaft: Stainless steel AISI 431
Technical Specifications of Pedrollo D
- Flow rate: up to 300 l/min (18 m³/h)
- Head: Up to 26m
- Liquid temperature: up to 40°C
- Suspended solids handling limit: up to Ø 10 mm
- Enclosure Class: IPX8
- Enclosure Class: F
- Speed: 2900 rpm
- Ingress Protection Rating: IP 68
Features of Pedrollo D
- Stainless Steel Intake Screens
- Built-in Float Switch for Single-Phase Models—for automatic pump control.
- Pumps supplied with 5 m of neoprene cable
- Built-in non-overloading motors with double mechanical seals—for continuous operation.
- Thermal Cutout in the Motor Windings—to protect against mechanical overload.
- Single-phase pumps can be connected directly to the mains power through a 10-amp fuse.
OPERATING CONDITIONS
- Pumped liquid: Thin, clean, non-aggressive liquids containing some impurities of up to 10 mm in diameter and fibers.
- Max. Fluid Temperature: +40° C
- Max. Immersion Depth: Dm – 5m, DC – 10m
- Min. Immersion Depth: Dm 10 – 210mm, Dm 30 – 250mm, DC 300mm
